Thrust roller bearings are used to primarily withstand axial loads, combined with radial loads, with the condition that the radial load does not exceed 55% of the axial load. Compared to other thrust roller bearings, this type of bearing has a lower friction coefficient, higher rotational speed, and also possesses self-aligning capabilities.
| Dimension(mm) | Radial Load | ||||||
|---|---|---|---|---|---|---|---|
| Model | inside | Outside | Height | Dynamic | Static | Maximum Speed | Weight |
| N-3255-A | 6" | 12.5" | 3.500" | 38.8kg | |||
| N-3247-A | 6" | 11.5" | 3" | 26.3kg | |||
| T9250FA-90015 | 5.5" | 21.5" | 5" | 191.3kg | |||
| T511A-902A4 | 5.0625" | 10.5" | 2.3125" | 17.8kg | |||
| T520-902A3 | 5" | 9.875" | 2.1875" | 13.9kg | |||
| T511F-902A5 | 5" | 10.5" | 2.3125" | 17.8kg | |||
| T511-903A2 | 5" | 10.5" | 2.3125" | 17kg | |||
| T511-902A3 | 5" | 10.5" | 2.3125" | 17kg | |||
| F-530-A | 5" | 10.5" | 2.3125" | ||||
| T451-902A1 | 4.5" | 9.875" | 2.125" | 14.2kg | |||
| T441-903A2 | 4.4" | 8.8" | 2.2" | 11.4kg | |||
| T441-902A1 | 4.4" | 8.8" | 2.2" | 11.4kg | |||
| T411F-902A5 | 4" | 8.5" | 1.8125" | 8.9kg | |||
| T411-903A2 | 4" | 8.5" | 1.8125" | 8.9kg | |||
| T411-902A4 | 4" | 8.5" | 1.8125" | 8.9kg | |||
| T311F-902A3 | 3" | 6.375" | 1.3215" | 3.5kg | |||
| T311-903A2 | 3" | 6.375" | 1.3215" | 3.5kg | |||
| T311-902A1 | 3" | 6.375" | 1.3215" | 3.5kg | |||
| 30TTHD013 | 3" | 6.375" | 1.312" | ||||
| T2520-903A2 | 2.5" | 4.625" | 1" | 1.3kg | |||
| T2520-902A1 | 2.5" | 4.625" | 1" | 1.3kg | |||
| T200A-903A2 | 2" | 4.3125" | 0.875" | 1kg | |||
| T200A-902A1 | 2" | 4.3125" | 0.875" | 1kg | |||
| T1750-902A1 | 1.75" | 3.336" | 0.7188" | 0.5kg | |||
| T1750-90010 | 1.75" | 3.336" | 0.7188" | 0.5kg | |||
| T135-902A1 | 1.375" | 3" | 0.625" | 0.4kg | |||
